You are here: Home > How To's > Button Knob Instructions

Fabric Button Knobs

How-to provided by www.jcarolinecreative.com

Printable Version

Just when I thought there were no more uses for you cover buttons, voila!
For this project you will need: You Cover Buttons I used Size 75 (1 7/8") flat-backs for the side drawers. The Size 60 flat-backs I used on the top drawer are too small to be very secure on the knob. Awesome Fabric -only Jessica Jones fabrics work for this project :) Glue gun Concave or flat knobs smaller than the buttons Wooden or rubber mallet (only necessary if the fabric is a canvas or other heavy-weight fabric. Otherwise you can push them together with your hands.)
	Trace around the template on the back of the you cover button kit and cut out your fabric.
	Place the fabric and button top in the holder, as instructed on the button package.
	Place the back of the button on the top and using a wooden mallet, hammer the pusher to snap the back into place. (I wasn't able to push the back on with my hands using the heavier material.)
	This is the knob I found at my local Lowe's. I liked the size and the fact that the top was concave-- gives me lots of surface area for glue. A rounded knob won't work as the button rocks around on the top and will fall off.
	I applied a massive amount of hot glue to the back of the button and then pressed the knob onto the button. Let cool.
	Install the knobs on your drawers and admire your fine effort.
copyright 2008 j. caroline designs, l.p. Feel free to use this pattern and instructions for personal or commercial use. Please do not reprint these instructions without permission. You may link to this page from your website without requesting permission.

Printable Version